• AK Muzzle Brake 7.62 x 39
  • AK Muzzle Brake 7.62 x 39
  • AK Muzzle Brake 7.62 x 39 mounted

SuperComp® XL AK Muzzle Brake 7.62x39 14x1mm LH Black (sku163) notched

$ 84.50
  • Specially Designed for AK variants 7.62 x 39 with LH 14 x1 mm Thread
  • This is notched version for mount with plunger (aka detent) pin. If you want a Crush Washer mount order the other un notched version, sku # 162
  • Least sight movement of any brake we have tested with very rapid return to zero. Unlike reverse gill or linear brakes, will NOT affect accuracy.
  • Precision CNC machined from pre-hardened billet chrome moly steel 4140 RH 28-32
  • Not a flash hider or suppresor 

REVIEW at Recoil Magazine

    This model is the AK variant of the SuperComp® XL brake which has fastest return to zero of any brake we know of and is our best seller.

    IMPORTANT, AK and variants have different mounting than AR 15. This model is notched and for mounting with barrels that have detent pin, If no detent pin use #162 is for crush washer or loctite (which is less preferably) installation that do not have detent pins. 

    This AK version has slightly larger exit bore than our 7.62 x51 brakes to allow for AK threading which often is inconsistent and many inexpensive AK variant do not have perfectly concentric threads.

    It uses the same patented SuperComp® Design as our other SuperComp® brakes but this model has three mixing chambers and a whopping 14 unique axial ports. With Hex SSPTM (6 way Star Stabilizing Pattern). No rearward facing gills for unwanted blast and side concussion is only moderate. No effect on accuracy or Point of Aim. Sound is actually reduced compared to most brakes. The result is incredibly fast follow up shots. So little muzzle movement, most time you can see your hits thru scope.

    As an example of quality, threads are cut with time consuming multiple pass single point cutting while brake is still in lathe to ensure perfect concentricity and no effect on accuracy. Most other manufacturers cut threads with single pass course die. Very important in the LH thread.

    This model CNC billet 4140 hardened Steel Parkerized. Included Crush Washer. Specs 4.8 oz. OAL 2.996 Diameter.996. Adds approx. 2.4" to Barrel length when mounted. US Patents (D) 711,491 666,687 692,086